Parts for SV06 Plus¶
Nozzles¶
Uses non-standard high flow nozzles. They look similar to Volcano nozzles but with different dimensions:
| Length | Threaded part | Tip Length |
|---|---|---|
| 23.5mm | 15.5mm | 8mm |
Buy from
Other sizes and hardened nozzles should be available late April.
Similar nozzles from Creativity and Polisi3D exist. They are 23mm long and the 0.5mm difference shouldn't be that significant.
Extruder Kit¶
Complete extruder assembly including the extruder, hotend, bed probe and fans. Drop in replacement for the existing one.
Buy from
Hotend Kit¶
SV06 Plus uses a unique hotend design. The original hotend kit repalcement comes with an 0.4 nozzle and a silicone sock
Buy from
Heated Bed¶
Heated bed with applied insulation, magnetic sticker and cable with all connectors and crimped ends.
Buy from
Screen¶
Uses a standard Creality screen but with Sovol's firmware. Original replacement not available yet.
PEI Print Sheet¶
SV06 Plus PEI has a slightly unique design with divots for alignment screws and unusual 320x310mm dimensions. Its painted grid isn't as bad as the SV06 one and doesn't stick to prints.
Buy from
PEI sheets for Ender 3 S1 Plus and Creality CR10 V2 have the two divots but are 310x315mm.
Buy from
A standard 310x310 spring steel sheet can work on an SV06 Plus but you'll need to be more careful when placing it.
Buy from
Power Supply¶
A 24V 500W power supply.
Buy from
Motherboard¶
SV06 original motherboard.
Linear Bearings¶
LM10UU linear bearings. IKO and Misumi are good quality brands.
There are 11 bearings in total, 3 on the X-axis, Z-axis has 4 and 4 more on the Y-axis.
Buy from
You can change from linear ball bearings to Igus or Drylin bearings.
Linear Rods¶
Hardened steel 10mm diameter linear rods.
Motors¶
X-Axis Motor¶
NEMA17 42x34 42BYGH160-A-20DN from Shengyang Motors
Y-Axis Motor¶
NEMA17 42x34 1.2A 42D21C412-02 from dgjlmotor.com
Z-Axis Motor¶
NEMA17 42x34 42BYGH160-A-20DN from Shengyang Motors
Extruder Motor¶
NEMA17 42x23