Skip to content

Power Supply Upgrades

Meanwell Upgrade

Upgrade the cheaply built power supply with a better power supply. Meanwell LRS-350-24 24V 350W power supply is recommended. You will need to print a new cover and install the new PSU with the socket switch.

LRS-350-24 is not officially available in EU

This power supply does not meet the harmonic current requirements outlined by BS EN/EN61000-3-2. Please do not use this power supply under the following conditions: 1. the end-devices is used within the European Union, and 2. the end-devices is connected to public mains supply With 220Vac or greater rated nominal voltage, and 3. the power supply is: - installed in end-devices With average or continuous input power greater than 75W, or - belong to part of a lighting system

TH3D's video instructions. They sell a printed cover and the [Meanwell PSU].

70mm Fan

Change original power supply to a silent 70mm fan. You'll need to print a new PSU cover.

@felixna on Printables

Power Supply Fan Noise Reduction

Taeky on Cults3D

See video for comparison.